What Criteria Cannot Be Used To Create A Custom Segment?

Create new segments – Review the per-user and per-view limits on segments, Once you reach those limits, you cannot create or import additional segments. You cannot create a segment that has both of the following:

• A condition based on demographics or interests (e.g., Age, Gender, Affinity Categories)
• An Exclude condition based on custom dimensions or custom variables,

If you try to create a segment with both types of conditions, Analytics doesn’t let you preview or create the segment until you delete one of them. If none of your existing segments address the data you want to analyze, then you can create new segments and configure them as broadly or narrowly as necessary.

Which factors Cannot be used to create a custom segment?

Answer: Ad Type, – On the Google Analytics exam, you’ll likely be asked, “What Criteria cannot be used to create a Custom Segment?”, A typical question will look something like this:

Dimensions

Metrics Ad type Sequences of user actions

The correct answer is Ad Type, Explanation: The segment builder only lets you create segments based on Analytics dimensions and metrics. Since Ad Type is not a measurable function of your traffic, it cannot be used to create a Custom Segment. However, you can still choose to select the Ad Type as the name for your custom segment.

• This will help you keep your traffic data organized, allowing for a better understanding of data and smarter decision-making.
• If you are looking to optimize your business’s website for Google and want to avoid wasting money and time, consider hiring a Digital Marketing Agency like Further Insights,
• Our marketing experts work closely with you to help you reach your online marketing goals and drive your business to success.

Schedule a free consultation today and get back to what really matters, helping people. Further Resources: https://support.google.com/analytics/answer/3124493 Check out these other articles on the Google Analytics Exam: Which Assets Cannot be Shared in The Solutions Gallery? What Scope Applies to Custom Metrics? What Remarketing Audiences Cannot Be Defined By Default? Within How Many Days Can a Deleted View Be Restored Which Three Campaign Parameters Are Recommended To Manually Track Campaigns What Asset Is Used To Build A Remarketing List What Would Prevent Data From Appearing In A Custom Report

What will segments not allow you to do?

Answer: Create subsets of sessions or users. Permanently alter data.

Which of the following Cannot be used in segmentation?

Free 10 Questions 40 Marks 10 Mins The Incorrect option is Technology Oriented Segmentation Key Points Market segmentation: Market segmentation is a marketing, advertising, and sales approach in which companie s divide their target market into smaller, more manageable groups based on common ground they share in order to optimise their marketing, advertising, and sales efforts. Important Points Basis for market segmentation:

Customer Based Segmentation: In this approach, customers are divided into smaller segments based on type of customers. Competition based Segmentation: In this type of market segmentation, the market is divided on the basis of the competitors. Both, direct and indirect competitors are taken into consideration. Product Related Segmentation: Product Related segmentation is the process of breaking a customer population into homogeneous groups depending on their relationships with the product, such as segmenting based on the benefits people seek when purchasing a product, usage rates for a product, or brand loyalty.

Technology Oriented Segmentation is not a valid basis for segmentation. Last updated on Mar 31, 2023 UP TGT (Trained Graduate Teacher) application window was closed on 16th July 2022. In this year’s recruitment cycle, a total of 3539 vacancies were released.

What criteria could not be used to create a dynamic remarketing audience?

Answer: Users who viewed a search result page on your website.

What is a custom segment?

How custom segments work – Custom segments automatically choose the right audience to best fit the needs of your campaign. Based on your campaign goals and bidding strategy, the system will interpret all of those signals and choose an audience that is focused on one of the following:

• Reach
• Consideration
• Performance

Example Rather than reaching the Sports Fans affinity segment, a running shoe company may want to reach Avid Marathon Runners instead. With custom segments, the shoe company can define this segment by entering keywords, URLs, and apps:

• Entering interests like “5K runs”, “triathlon athlete”, or “long distance runner”.
• Using URLs of websites with content about running, training schedules, marathon nutrition, and other marathon themes.
• Entering apps in the Health & Fitness category that an Avid Marathon Runner may likely be interested in like Google Fit.

How do I create a custom segment in Analytics?

What is segment availability in Google Analytics? – Segment availability is the ability to share the custom created segments across different views or restrict it to the particular view in which the segment was created. Let us see how to use this feature in Google Analytics. Step-3: Click on ‘Change’ to see the different options that are available to make the segment visible in any view. Step-4: You will see a popup like below with three options for making the segment available.

• I can apply/edit segments in any view: Makes the segment available in any view that you have access to.
• I can apply/edit a segment in this view: Restricts the segment to only the view where you have created a segment.
• Collaborators and I can apply/edit segments in this view: Other users with collaborate permission to the view will be able to apply and make edits to the segment that you have created.

What are the criteria that make up segmentation?

How Do You Identify Market Segments? – Broadly speaking, identifying a market segment requires the following three criteria. To start, the main needs of a sub-group must be homogenous. Second, the segment must share distinct characteristics. Finally, the segment produces a similar response to marketing techniques.

What are the four basic criteria used to produce segments that a segmentation scheme must include?

The four criteria are substantiality, identifiability and measurability, accessibility, and responsiveness.12. To be useful, a segmentation scheme must produce segments that meet four basic criteria.

Which of the following is not a segment selection criteria?

A competitive position is not an evaluation criteria when considering market segmentation, although improving a company’s competitive position is an expected outcome and reason for considering segmenting customers into groups.

Which one is not the variables of segmentation?

The answer here is ‘C’, process. The variable that is not directly affected by market segmentation. Market segmentation is a major step in the marketing process which divides the heterogeneous market into homogeneous segments consisting of consumers who might be preferring similar products or the same marketing mix.

Which of the following is not a type of segment descriptor?

1. The instruction, MOV AX, 0005H belongs to the address mode a) register b) direct c) immediate d) register relative Answer: c Explanation: In Immediate addressing mode, immediate data is a part of instruction and appears in the form of successive byte or bytes.2.

• The instruction, MOV AX, 1234H is an example of a) register addressing mode b) direct addressing mode c) immediate addressing mode d) based indexed addressing mode Answer: c Explanation: Since immediate data is present in the instruction.3.
• The instruction, MOV AX, is an example of a) immediate addressing mode b) direct addressing mode c) indirect addressing mode d) register addressing mode Answer: b Explanation: Since the address is directly specified in the instruction as a part of it.4.

If the data is present in a register and it is referred using the particular register, then it is a) direct addressing mode b) register addressing mode c) indexed addressing mode d) immediate addressing mode Answer: b Explanation: Since register is used to refer the address.5.

The instruction, MOV AX, is an example of a) direct addressing mode b) register addressing mode c) register relative addressing mode d) register indirect addressing mode Answer: d Explanation: Since the register used to refer to the address is accessed indirectly. Crack Job Placement Aptitude in First Attempt 6.

If the offset of the operand is stored in one of the index registers, then it is a) based indexed addressing mode b) relative based indexed addressing mode c) indexed addressing mode d) none of the mentioned Answer: c Explanation: In the indexed addressing mode, the offset of an operand is stored and in the rest of them, address is stored.7.

The addressing mode that is used in unconditional branch instructions is a) intrasegment direct addressing mode b) intrasegment indirect addressing mode c) intrasegment direct and indirect addressing mode d) intersegment direct addressing mode Answer: b Explanation: In intrasegment indirect mode, the branch address is found as the content of a register or a memory location.8.

If the location to which the control is to be transferred lies in a different segment other than the current one, then the mode is called a) intrasegment mode b) intersegment direct mode c) intersegment indirect mode d) intersegment direct and indirect mode Answer: d Explanation: In intersegment mode, the control to be transferred lies in a different segment.9.

The instruction, JMP 5000H:2000H; is an example of a) intrasegment direct mode b) intrasegment indirect mode c) intersegment direct mode d) intersegment indirect mode Answer: c Explanation: Since in intersegment direct mode, the address to which the control is to be transferred is in a different segment.10.

The contents of a base register are added to the contents of index register in a) indexed addressing mode b) based indexed addressing mode c) relative based indexed addressing mode d) based indexed and relative based indexed addressing mode Answer: d Explanation: The effective address is formed by adding the contents of both base and index registers to a default segment.

• Python Programming for Complete Beginners 11.
• The instruction that is used to transfer the data from source operand to destination operand is a) data copy/transfer instruction b) branch instruction c) arithmetic/logical instruction d) string instruction Answer: a Explanation: These instructions are used to copy and transfer the instructions.12.

Which of the following is not a data copy/transfer instruction? a) MOV b) PUSH c) DAS d) POP Answer: c Explanation: DAS (Decimal Adjust after Subtraction) is an arithmetic instruction.13. The instructions that involve various string manipulation operations are a) branch instructions b) flag manipulation instructions c) shift and rotate instructions d) string instructions Answer: d Explanation: The string instructions perform operations on strings such as load, move, scan, compare etc.14.

Which of the following instruction is not valid? a) MOV AX, BX b) MOV DS, 5000H c) MOV AX, 5000H d) PUSH AX Answer: b Explanation: Both the source and destination operands cannot be memory locations except for string instructions.15. In PUSH instruction, after each execution of the instruction, the stack pointer is a) incremented by 1 b) decremented by 1 c) incremented by 2 d) decremented by 2 Answer: d Explanation: The actual current stack-top is always occupied by the previously pushed data.

So, the push operation decrements SP by 2 and then stores the two bytes contents of the operand onto the stack. Crack Job Placement Aptitude in First Attempt 16. The instruction that pushes the contents of the specified register/memory location on to the stack is a) PUSHF b) POPF c) PUSH d) POP Answer: c Explanation: Since PUSH operation transfers data to stack from a register or memory location.17.

In POP instruction, after each execution of the instruction, the stack pointer is a) incremented by 1 b) decremented by 1 c) incremented by 2 d) decremented by 2 Answer: c Explanation: The actual current stack top is poped into the specific operand as the contents of stack top memory is stored in AL&SP and further contents of the memory location pointed to by SP are copied to AH & SP.18.

The instructions that are used for reading an input port and writing an output port respectively are a) MOV, XCHG b) MOV, IN c) IN, MOV d) IN, OUT Answer: d Explanation: The address of the input/output port may be specified directly or indirectly. Example for input port: IN AX, DX; This instruction reads data from a 16-bit port whose address is in DX and stores it in AX Example for output port: OUT 03H, AL; This sends data available in AL to a port whose address is 03H.19.

1. The instruction that is used for finding out the codes in case of code conversion problems is a) XCHG b) XLAT c) XOR d) JCXZ Answer: b Explanation: The translate(XLAT) instruction is used to find codes.20.
2. The instruction that loads effective address formed by destination operand into the specified source register is a) LEA b) LDS c) LES d) LAHF Answer: a Explanation: The instruction, LEA loads effective address and is more useful for assembly language rather than for machine language.

Crack Job Placement Aptitude in First Attempt 21. The instruction that loads the AH register with the lower byte of the flag register is a) SAHF b) AH c) LAHF d) PUSHF Answer: c Explanation: The instruction LAHF(Load AH from a lower byte of Flag) may be used to observe the status of all the condition code flags(except overflow flag) at a time.22.

1. The instruction that pushes the flag register on to the stack is a) PUSH b) POP c) PUSHF d) POPF Answer: c Explanation: The instruction PUSHF(push flags to stack) pushes the flag register on to the stack.23.
2. The instruction that loads the flag register completely from the word contents of the memory location is a) PUSH b) POP c) PUSHF d) POPF Answer: d Explanation: POPF is pop flags to stack.24.

The instruction that adds immediate data/contents of the memory location specified in an instruction/register to the contents of another register/memory location is a) SUB b) ADD c) MUL d) DIV Answer: b Explanation: ADD instruction adds the data.25. The instruction that supports addition when carry exists is a) ADD b) ADC c) ADD & ADC d) None of the mentioned Answer: b Explanation: ADC(Add with Carry) instruction performs the same operation as ADD operation, but adds the carry flag bit to the result.

• This set of Microprocessor Multiple Choice Questions & Answers (MCQs) focuses on “Segmentation”.
• Python Programming for Complete Beginners 26.
• The instruction, “INC” increases the contents of the specified register or memory location by a) 2 b) 0 c) 1 d) 3 Answer: c Explanation: This instruction adds 1 to the contents of the operand and so increments by 1.27.

The instruction that subtracts 1 from the contents of the specified register/memory location is a) INC b) SUBB c) SUB d) DEC Answer: d Explanation: The DEC instruction decrements the contents of a specified register/memory location by 1.28. The instruction that enables subtraction with borrow is a) DEC b) SUB c) SBB d) None of the mentioned Answer: c Explanation: The SBB instruction subtracts the source operand and the borrow flag from the destination operand.29.

The flag that acts as Borrow flag in the instruction, SBB is a) direction flag b) carry flag c) parity flag d) trap flag Answer: b Explanation: If borrow exists in the subtraction operation performed then carry flag is set.30. In general, the source operand of an instruction can be a) memory location b) register c) immediate data d) all of the mentioned Answer: d Explanation: The source operand is the element which is data or data stored memory location on which operation is performed.

Learn Machine Learning with Python from Scratch 31. In general, the destination operand of an instruction can be a) memory location b) register c) immediate data d) memory location and register Answer: d Explanation: Since the destination should be able to store the data, immediate data cannot be considered as a destination operand.32.

• The instruction, CMP to compare source and destination operands it performs a) addition b) subtraction c) division d) multiplication Answer: b Explanation: For comparison, the instruction CMP subtracts source operand from destination operand.33.
• During comparison operation, the result of comparing or subtraction is stored in a) memory b) registers c) stack d) no where Answer: d Explanation: The result of subtraction operation is not stored anywhere during a comparison.34.

The instruction that converts the result in an unpacked decimal digits is a) AAA b) AAS c) AAM d) All of the mentioned Answer: d Explanation: All the ASCII adjust instructions give result in unpacked decimal form and so are called as “Unpacked BCD arithmetic instructions”.35.

Which of the following is a mnemonic? a) ADD b) ADC c) AAA d) ADD & ADC Answer: c Explanation: AAA is a mnemonic. It doesn’t have either a source or destination operand. Python Programming for Complete Beginners 36. The instruction in which adjustment is made before performing the operation is a) AAA b) AAS c) AAM d) AAD Answer: d Explanation: The AAD instruction converts two unpacked BCD digits in AH and AL to the equivalent binary number in AL.

This adjustment must be made before dividing the two unpacked BCD digits.37. The expansion of DAA is a) decimal adjust after addition b) decimal adjust before addition c) decimal adjust accumulator d) decimal adjust auxiliary Answer: c Explanation: This instruction performs conversion operation.38.

1. The instruction that is used to convert the result of the addition of two packed BCD numbers to a valid BCD number is a) DAA b) DAS c) AAA d) AAS Answer: a Explanation: In this conversion, the result has to be only in AL.39.
2. The ROR instruction rotates the contents of the destination operand to a) left b) right c) left and then right d) right and then left Answer: b Explanation: ROR stands for Rotate Right without carry.

so, the instruction rotates right.40. The instruction, “INC” increases the contents of the specified register or memory location by a) 2 b) 0 c) 1 d) 3 Answer: c Explanation: This instruction adds 1 to the contents of the operand and so increments by 1.

Crack Job Placement Aptitude in First Attempt 41. The instruction that subtracts 1 from the contents of the specified register/memory location is a) INC b) SUBB c) SUB d) DEC Answer: d Explanation: The DEC instruction decrements the contents of a specified register/memory location by 1.42. The instruction that enables subtraction with borrow is a) DEC b) SUB c) SBB d) None of the mentioned Answer: c Explanation: The SBB instruction subtracts the source operand and the borrow flag from the destination operand.43.

The flag that acts as Borrow flag in the instruction, SBB is a) direction flag b) carry flag c) parity flag d) trap flag Answer: b Explanation: If borrow exists in the subtraction operation performed then carry flag is set.44. In general, the source operand of an instruction can be a) memory location b) register c) immediate data d) all of the mentioned Answer: d Explanation: The source operand is the element which is data or data stored memory location on which operation is performed.45.

In general, the destination operand of an instruction can be a) memory location b) register c) immediate data d) memory location and register Answer: d Explanation: Since the destination should be able to store the data, immediate data cannot be considered as a destination operand. Crack Job Placement Aptitude in First Attempt 46.

The instruction, CMP to compare source and destination operands it performs a) addition b) subtraction c) division d) multiplication Answer: b Explanation: For comparison, the instruction CMP subtracts source operand from destination operand.47. During comparison operation, the result of comparing or subtraction is stored in a) memory b) registers c) stack d) no where Answer: d Explanation: The result of subtraction operation is not stored anywhere during a comparison.48.

The instruction that converts the result in an unpacked decimal digits is a) AAA b) AAS c) AAM d) All of the mentioned Answer: d Explanation: All the ASCII adjust instructions give result in unpacked decimal form and so are called as “Unpacked BCD arithmetic instructions”.49. Which of the following is a mnemonic? a) ADD b) ADC c) AAA d) ADD & ADC Answer: c Explanation: AAA is a mnemonic.

It doesn’t have either a source or destination operand.50. The instruction in which adjustment is made before performing the operation is a) AAA b) AAS c) AAM d) AAD Answer: d Explanation: The AAD instruction converts two unpacked BCD digits in AH and AL to the equivalent binary number in AL.

• This adjustment must be made before dividing the two unpacked BCD digits.
• Python Programming for Complete Beginners 51.
• The expansion of DAA is a) decimal adjust after addition b) decimal adjust before addition c) decimal adjust accumulator d) decimal adjust auxiliary Answer: c Explanation: This instruction performs conversion operation.52.

The instruction that is used to convert the result of the addition of two packed BCD numbers to a valid BCD number is a) DAA b) DAS c) AAA d) AAS Answer: a Explanation: In this conversion, the result has to be only in AL.53. The ROR instruction rotates the contents of the destination operand to a) left b) right c) left and then right d) right and then left Answer: b Explanation: ROR stands for Rotate Right without carry.

• So, the instruction rotates right.54.
• The mnemonic that is placed before the arithmetic operation is performed is a) AAA b) AAS c) AAM d) AAD Answer: d Explanation: The AAD instruction converts two unpacked BCD digits in AH and AL to the equivalent binary number in AL.55.
• The Carry flag is undefined after performing the operation a) AAA b) ADC c) AAM d) AAD Answer: d Explanation: Since the operation, AAD is performed before division operation is performed, the carry flag, auxiliary flag and overflow flag are undefined.

Learn Machine Learning with Python from Scratch 56. The instruction that performs logical AND operation and the result of the operation is not available is a) AAA b) AND c) TEST d) XOR Answer: c Explanation: In the TEST instruction, the logical AND operation is performed and the result is not stored but flags are affected.57.

In the RCL instruction, the contents of the destination operand undergo function as a) carry flag is pushed into LSB & MSB is pushed into the carry flag b) carry flag is pushed into MSB & LSB is pushed into the carry flag c) auxiliary flag is pushed into LSB & MSB is pushed into the carry flag d) parity flag is pushed into MSB & LSB is pushed into the carry flag Answer: a Explanation: In RCL(Rotate right through carry), for each operation, the carry flag is pushed into LSB and the MSB of the operand is pushed into carry flag.58.

The instruction that is used as prefix to an instruction to execute it repeatedly until the CX register becomes zero is a) SCAS b) REP c) CMPS d) STOS Answer: b Explanation: The instruction to which the REP is prefix, is executed repeatedly until CX register becomes zero.

1. When CX becomes zero, the execution proceeds to the next instruction in sequence.59.
2. Match the following A) MOvSB/SW 1) loads AL/AX register by content of a string B) CMPS 2) moves a string of bytes stored in source to destination C) SCAS 3) compares two strings of bytes or words whose length is stored in CX register D) LODS 4) scans a string of bytes or words a) A-3,B-4,C-2,D-1 b) A-2,B-1,C-4,D-3 c) A-2,B-3,C-1,D-4 d) A-2,B-3,C-4,D-1 Answer: d Explanation: By using the string instructions, the operations on strings can be performed.60.

The instructions that are used to call a subroutine from the main program and return to the main program after execution of called function are a) CALL, JMP b) JMP, IRET c) CALL, RET d) JMP, RET Answer: c Explanation: At each CALL instruction, the IP and CS of the next instruction are pushed onto the stack, before the control is transferred to the procedure.

1. At the end of the procedure, the RET instruction must be executed to retrieve the stored contents of IP & CS registers from a stack.
2. Crack Job Placement Aptitude in First Attempt 61.
3. The instruction that unconditionally transfers the control of execution to the specified address is a) CALL b) JMP c) RET d) IRET Answer: b Explanation: In this the control transfers to the address specified in the instruction and flags are not affected by this instruction.62.

Which instruction cannot force the 8086 processor out of ‘halt’ state? a) Interrupt request b) Reset c) Both interrupt request and reset d) Hold Answer: d Explanation: Only an interrupt request or Reset will force the 8086 processor to come out of the ‘halt’ state.63.

NOP instruction introduces a) Address b) Delay c) Memory location d) None of the mentioned Answer: b Explanation: NOP is the No operation. It means that the processor performs no operation for the clock cycle and thus there exists a delay.64. Which of the following is not a machine controlled instruction? a) HLT b) CLC c) LOCK d) ESC Answer: b Explanation: Since CLC is a flag manipulation instruction where CLC stands for Clear Carry Flag.

This set of Microprocessor Multiple Choice Questions & Answers (MCQs) focuses on “Assembler Directives and Operators”.65. The assembler directives which are the hints using some predefined alphabetical strings are given to a) processor b) memory c) assembler d) processor & assembler Answer: c Explanation: These directives help the assembler to correctly understand the assembly language programs to prepare the codes.

Crack Job Placement Aptitude in First Attempt 66. The directive used to inform the assembler, the names of the logical segments to be assumed for different segments used in the program is a) ASSUME b) SEGMENT c) SHORT d) DB Answer: a Explanation: In ALP, each segment is given a name by using the directive ASSUME SYNTAX: ASSUME segment:segment_name Eg: ASSUME CS:Code here CS is the Code segment and code is the name assumed to the segment.67.

Match the following a) DB 1) used to direct the assembler to reserve only 10-bytes b) DT 2) used to direct the assembler to reserve only 4 words c) DW 3) used to direct the assembler to reserve byte or bytes d) DQ 4) used to direct the assembler to reserve words a) a-3, b-2, c-4, d-1 b) a-2, b-3, c-1, d-4 c) a-3, b-1, c-2, d-4 d) a-3, b-1, c-4, d-2 Answer: d Explanation: These directives are used for allocating memory locations in the available memory.68.

The directive that marks the end of an assembly language program is a) ENDS b) END c) ENDS & END d) None of the mentioned Answer: b Explanation: The directive END is used to denote the completion of the program.69. The directive that marks the end of a logical segment is a) ENDS b) END c) ENDS & END d) None of the mentioned Answer: a Explanation: The directive ENDS is used to end a segment where as the directive END is used to end the program.70.

The directive that updates the location counter to the next even address while executing a series of instructions is a) EVN b) EVEN c) EVNE d) EQU Answer: b Explanation: The directive updates location counter to next even address if the current location counter contents are not even.

• Crack Job Placement Aptitude in First Attempt 71.
• The directive that directs the assembler to start the memory allotment for a particular segment/block/code from the declared address is a) OFFSET b) LABEL c) ORG d) GROUP Answer: c Explanation: If an ORG is written then the assembler initiates the location counter to keep the track of allotted address for the module as mentioned in the directive.

If the directive is not present, then the location counter is initialized to 0000H.72. The directive that marks the starting of the logical segment is a) SEG b) SEGMENT c) SEG & SEGMENT d) PROC Answer: b Explanation: The directive SEGMENT indicates the beginning of the segment.73.

The recurrence of the numerical values or constants in a program code is reduced by a) ASSUME b) LOCAL c) LABEL d) EQU Answer: d Explanation: In this, the recurring/repeating value is assigned with a label. The label is placed instead of the numerical value in the entire program code.74. The labels or constants that can be used by any module in the program is possible when they are declared as a) PUBLIC b) LOCAL c) GLOBAL d) Either PUBLIC or GLOBAL Answer: c Explanation: The labels, constants, variables, procedures declared as GLOBAL can be used by any module in the program.75.

If a number of instructions are repeating through the main program, then to reduce the length of the program, _ is used. a) procedure b) subroutine c) macro d) none of the mentioned Answer: c Explanation: For a certain number of instructions that are repeated in the main program, when macro is defined then the code of a program is reduced by placing the name of the macro at which the set of instructions are needed to be repeated.

• Python Programming for Complete Beginners 76.
• The process of assigning a label or macroname to the string is called a) initialising macro b) initialising string macro c) defining a string macro d) defining a macro Answer: d Explanation: The process of assigning a label to the string is called defining a macro.77.

A macro within a macro is called a) macro-within-macro b) nested macro c) macro-in-macro d) none of the mentioned Answer: b Explanation: A macro may be called from inside a macro. This type of macro is called nested macro.78. A macro can be defined as a) beginning of a program b) end of a program c) after initialisation of program d) anywhere in a program Answer: d Explanation: A macro can be defined anywhere in a program.79.

• A macro can be used as _ a) in data segment b) to represent directives c) to represent statements d) all of the mentioned Answer: d Explanation: A macro may be used in data segment and can also be used to represent statements and directives.80.
• The end of a macro can be represented by the directive.
• A) END b) ENDS c) ENDM d) ENDD Answer: c Explanation: The ENDM directive marks the end of the instructions or statements sequence assigned with the macro name.

Crack Job Placement Aptitude in First Attempt 81. Inserting the statements and instructions represented by macro, directly at the place of the macroname, in the program, is known as a) calling a macro b) inserting a macro c) initializing a macro d) none of the mentioned Answer: a Explanation: Inserting the statements and instructions at the place of macroname, in the program, is known as calling a macro.82.

1. The time required for execution of a macro is _ that of the procedure.
2. A) greater than b) less than c) equal to d) none of the mentioned Answer: b Explanation: The time required for execution of a macro is less than that of procedure as it does not contain CALL and RET instructions as the procedures do.83.

Which of the following statements is incorrect? a) complete code of instruction string is inserted at each place, wherever the macroname appears b) macro requires less time of execution than that of procedure c) macro uses stack memory d) macroname can be anything except registers and mnemonics Answer: c Explanation: Macro does not require stack memory and hence has less time for execution.84.

What are the 4 major segmentation categories?

The 4 main types of segmentation variables include demographic, geographic, psychographic, and behavioral traits.

What are the 4 factors of segmentation?

Other types of market segmentation with examples – Demographic, psychographic, geographic, and behavioral are the four pillars of market segmentation, but consider using these four extra types to enhance your marketing efforts.